Stænklapper til Volvo EX30

Excellent quality - tough and durable - easy to fit to the car and loom really good. Would recommend - value for money.

As other reviewers have said, the rear ones, fitted in a couple of minutes each with the existing screws, very simple and a good fit

The fronts, the push fittings into the bottom were very fiddly, the additional screws to go into the middle hole of the fronts rusted after a week, the instructions for the fronts weren’t clear and resulted in both taking considerably longer than the rears.

For anyone else buying these, buy some stainless self tappers for the fronts, take your time with the underneath push fittings and make sure they’re pushed in not screwed. Can’t really complain for the cost vs Volvo official ones but be prepared to have some patience with doing the fronts.

Fitting rear flaps for EX30 was straightforward with the aid of a short-throw 1/4" hex spanner & torx bit to remove/refit the in-situ screws.

For the front flaps the bottom plastic push-rivets were a bit of a fiddle to insert & needed cropping a little to fit - they need a firm push, don't screw them in or you'll break them. I then added 2x stainless flanged self-tappers (#10 x 5/8") per the instructions for the Volvo original parts as the supplied screws looked likely to corrode - the flaps ain't going anywhere :)

So - the flaps themselves seem OK but fitting is a fiddle.

Fitted very well but had to drill and screw in front flaps as hole did not match anything on car. Rear perfect and all round very good.

These mud flats are very effective and discreet at the same time